AIA

Car diagnostics — in plain words

Android app: plug a cheap ELM327 adapter into the OBD-II port and get your car's condition without raw numbers and codes. Verdicts on 6 systems, danger alarm and fault-code explanations.

€3.5 · 30-day subscription · updates included
Buy subscriptionHow it works

🚗 ECU parameters

RPM, speed, load, throttle, oil/coolant temperature, pressure, MAF, battery voltage.

✅ Verdicts on 6 systems

Engine, oil, cooling, fuel, electrics, brakes/ABS — OK / WARNING / DANGER with actions.

🔔 Danger alarm

On dangerous state — sound and notification "Stop the vehicle" even with the screen off.

🔧 DTC decoder

Built-in fault-code database (SAE J2012): clear explanation and what to check. Works offline.

👨‍👩‍👧 Two modes

"Passenger" — simple screen without numbers. "Engineer" — detailed parameters and codes.

🌍 English & Русский

Full localization. Demo mode — see how it works without a car.

Normal state
Normal state — "Car is fine"
Danger state
Danger state — "Stop the vehicle" alarm

Buy subscription

€3.5 — 30 days of the full version. App and fault-code database updates are included.

Place an order

Install the app (APK); on first launch it shows the device code (hw_id). Enter it and your contact — after payment we activate the subscription.
Shown on the "Subscription" screen at first launch

💳 Pay via crypto exchange (USDT TRC-20)

Send 3.5 USDT (network TRC-20) to the wallet address below. After we confirm the payment, your subscription is activated.
After payment, send the TXID (transaction hash) to d01011960g@gmail.com — this speeds up activation.
Only USDT on the TRC-20 network is accepted. Sending to another network may result in a loss of funds.

Already paid — check status

Enter the device code: if the subscription is active, you will see the end date.
Download the app: Autodiagnost-1.0.zip (1.5 MB) — install it; on first launch it shows the device code (hw_id).
Works with any ELM327 adapter (Bluetooth, OBD-II) and Android with Bluetooth. The app does not replace a professional auto service.

How it works

A minute to the first diagnostics

1. Plug in

Insert ELM327 into the OBD-II port (usually under the steering column), turn on the ignition.

2. Pair

In phone Bluetooth settings find the adapter (OBDII/ELM327) and pair it.

3. Launch

Press "Connect" — the app reads the ECU and shows the condition.

4. Subscription

No adapter? Use the demo mode — see how it works before buying.

Which adapter do I need?

Honestly about what reads free, what costs extra, and whether it is safe.

Minimal — ELM327

For basic engine / emission diagnostics. Cheap (from ~$6), many drivers already have one. Bluetooth + Android.

Advanced — MUCAR BT200 / KINGBOLEN Ediag Plus

Read body modules: airbags (SRS), ABS, steering, locks — things the ELM327 physically cannot see.

About paid features. These scanners have their own apps, and some functions (airbags, gearbox, special resets) are paid inside the MUCAR/Ediag app. This is not "hidden in the hardware": the adapter physically supports everything, and the paid license simply unlocks it in the app. Free — basic engine diagnostics. Airbags/ABS — in the paid subscription of that app.
Can it "break" something? Normal code reading is safe — the app does not reflash the adapter or harm the car. Risk exists only in two cases: interrupting the adapter's own firmware update (power cut in the middle) or carelessly using "active tests / coding" on an incompatible car. Just don't do those — and you are fine.
Summary: to read engine fault codes — any ELM327 works. To read airbags/ABS/body — you need MUCAR BT200 or KINGBOLEN Ediag Plus, and those are paid functions of their apps. Reading itself is safe; just avoid interrupting the adapter's firmware update and random active tests.

FAQ

Brief answers

What do I need for diagnostics?

Basic: any ELM327 (Bluetooth, OBD-II). Many already have one — then only the subscription is needed. Advanced (airbags/ABS): MUCAR BT200 or KINGBOLEN Ediag Plus.

Why a subscription, not one-time?

Updates are included: new DTC codes, database expansion, new features — the app keeps improving.

How to renew?

Pay the next month (€3.5) — the subscription extends for another 30 days. Cancel anytime by simply not renewing.

Works offline?

Diagnostics and code decoding are built-in and work offline. Subscription status is checked on launch (internet needed).